1. Definitions of Geometric Objects
Sign In
An error ocurred, try again later!
Chapter 1
1.
Definitions of Geometric Objects
The world of geometry is built upon fundamental concepts like points, lines, and their characteristics. Points are precise locations in space, while lines extend infinitely in both directions. By combining these undefined terms, we can define more complex geometric objects. Angles, formed by two rays sharing a common endpoint, allow us to measure rotational relationships. Circles, composed of points equidistant from a central point, form closed curves with intriguing properties. Parallel lines, which never intersect, have practical applications in fields like architecture and transportation.
Geometry provides a framework for understanding and modeling our physical world. Angles help us analyze shapes and their orientations, while circles have applications in architecture, engineering, and art. Parallel lines are vital in fields such as construction and design, ensuring structural stability and alignment. By mastering these geometric objects and their definitions, we gain a powerful toolset for solving problems and representing real-world scenarios accurately.
In conclusion, points, lines, angles, circles, and parallel lines are essential building blocks in geometry. Their precise definitions enable us to understand spatial relationships, measure angles, create circular shapes, and maintain parallelism. These concepts find applications in various fields, making geometry a fundamental discipline for problem-solving and modeling in the real world.
Show less Show more expand_more Lesson Settings & Tools
| | 19 Theory slides |
| | 8 Exercises - Grade E - A |
| | Each lesson is meant to take 1-2 classroom sessions |
Definitions of Geometric Objects
Slide of 19
The most basic objects used in geometry are points, lines, and planes. However, these objects are called undefined terms since they do not have a precise definition — they are described using their characteristics. But despite this, their descriptions can be used to define many more geometric objects properly.
Catch-Up and Review
Here are a few recommended readings before getting started with this lesson.
Challenge
Categorizing Geometric Objects
Tearrik's baby accidentally knocked some boxes off the shelf. Now, the objects are cluttered all over the floor.
Help Tearrik clean up the mess by moving each object to the corresponding box.
Discussion
How Are Angles Formed?
When having two distinct rays on the same plane, there are various ways of positioning them. If it were to be the case that both rays have the same starting point, the geometric figure has its own name, an angle.
Concept
Angle
An angle is a plane figure formed by two rays that have the same starting point. This common point is called the vertex of the angle and the rays are the sides of the angle.
There are different ways to denote an angle and all involve the symbol ∠
in front of the name. One way is to name an angle by its vertex alone. Alternatively, it can be named by using all three points that make up the angle. In this case, the vertex is always in the middle of the name. Additionally, angles within a diagram can be denoted with numbers or lowercase Greek letters.
| Using the Vertex | Using the Vertex and One Point on Each Ray | Using a Number | Using Greek Letters |
|---|---|---|---|
| ∠B | ∠ABC or ∠CBA | ∠1 | ∠α or ∠β or ∠θ |
The measure of an angle, denoted by m∠, is the number of degrees between the rays. It is found by applying the Protractor Postulate. When two angles have the same measure, they are said to be congruent.
Interior and Exterior of an Angle
An angle divides the plane into two parts.
- The region between the sides, or
interior
of the angle - The region outside the sides, or
exterior
of the angle
Discussion
An Angle Defined Using Transformations
Consider angle ∠PQR. What type of movement could be applied to QP such that it lies exactly on QR?
A rotation around Q can send QP onto QR. This fact allows for an angle to be defined in terms of transformations.
Using this definition, the measure of the angle is the angle of rotation that maps one ray onto the other.
An angle is a figure formed by a ray and its image after being rotated around its endpoint.
Example
Students Define Angles
At a geometry forum, one question made by the audience was to say what an angle is. The only ones who answered this question were Heichi and his friends.
b Emily said
an angle is the set of points formed by two different rays with a common point.
c Kevin said
an angle is the set of points formed by two different rays with the same endpoint.
Analyze each definition, indicate whether it is mathematically correct, and point out the flaws, if any.
Answer
a Heichi's answer has a major flaw. It includes incorrect cases, for instance, when the rays do not intersect.
b Emily's answer has the flaw of not being precise. It includes incorrect cases, for instance, two intersecting rays with different endpoints.
c Kevin's answer is correct and the most classical definition.
Hint
a Consider all possible positions for two different rays in a plane.
b Notice that it is not said whether the common point is the endpoint of both rays.
c For two rays, having the same endpoint is the same as sharing the same starting point.
Solution
a Heichi's answer has a major flaw. He did not mention any relationship between the rays other than being different. Then, his definition includes the following four cases.
- Two non-intersecting rays.
- Two intersecting rays with different endpoints.
- Two rays such that one of them passes through the endpoint of the other.
- Two rays with the same endpoint.
Among these cases, only the fourth one corresponds to an angle. Consequently, Heichi's definition is not precise since it includes incorrect cases.
b As with Heichi, Emily's answer has the flaw of not being precise. Besides the fourth and correct case, her answer includes the second and third cases, which are not correct.
c Kevin's answer is correct. Although he said that both rays have the same endpoint, this is equivalent to say that both rays share the same starting point.
Discussion
Definition of a Circle
Consider two points A and B on a plane such that their distance is 2. Apart from B, are there more points on the plane whose distance to A is also 2?
The answer is yes. There are infinitely many, and the set of all these points is called a circle.
Concept
Circle
A circle is the set of all the points in a plane that are equidistant from a given point. There are a few particularly notable features of a circle.
- Center - The given point from which all points of the circle are equidistant. Circles are often named by their center point.
- Radius - A segment that connects the center and any point on the circle. Its length is usually represented algebraically by r.
- Diameter - A segment whose endpoints are on the circle and that passes through the center. Its length is usually represented algebraically by d.
- Circumference - The perimeter of a circle, usually represented algebraically by C.
circle O,since it is centered at O.
Discussion
Circle Definition Using Transformations
Example
A Circle and Its Center
Let C1 be a circle centered at point P with a radius of 3 centimeters. Pick any point on this circle and label it as Q.
a Does P belong to C1?
b Consider ⊙Q such that it has a radius of 3 centimeters. What is the relationship between P and this circle?
Answer
a No
b Point P belongs to the circle centered at point Q with a radius of 3 centimeters.
Hint
a A circle is the set of all points that are equidistant from a given point.
b Consider the distance between P and Q.
Solution
a By definition, a circle is the set of all points that are equidistant from a given point. In this case, C1 is the set of points whose distance to P is 3 centimeters.
Since point P is not 3 centimeters apart from itself, it does not belong to C1.
b By definition, the circle centered at Q with a radius of 3 centimeters is the set of all points whose distance to Q is 3 centimeters. Since Q belongs to C1, its distance to P is 3 centimeters. In consequence, point P belongs to the circle centered at Q.
Explore
Positioning Lines in a Plane
When two lines are drawn in a plane, there are two possible options — they intersect each other or they do not intersect at all. Move the points A and B to investigate the name given to the lines when they do not intersect. Is there only one way to position A and B such that AB and ℓ do not intersect?
For the next definition, it is crucial that the lines are in the same plane.
Discussion
Parallel Lines
Two coplanar lines — lines that are on the same plane — that do not intersect are said to be parallel lines. In a diagram, triangular hatch marks are drawn on lines to denote that they are parallel. The symbol ∥
is used to algebraically denote that two lines are parallel. In the diagram, lines m and ℓ are parallel.
Discussion
Parallel Lines Using Transformations
Consider a pair of parallel lines. Is it possible to translate one line such that it lies exactly on the other? Try moving line ℓ onto line m.
The diagram confirms that it is possible to send one line onto the other using a translation. This allows defining parallel lines in terms of transformations.
Notice that this definition does not require the lines to be coplanar.
Two lines are parallel when one of the lines is the image of the other under a translation.
Example
Students Define Parallel Lines
Last week, Kevin and his friends learned about parallel lines. Today, the teacher asked them to define, without using their notes, what does it mean for two distinct lines to be parallel.
b Emily said
two distinct lines are parallel when they do not meet.
c Heichi said
two distinct lines are parallel when they do not intersect each other and are coplanar.
Analyze each definition and indicate whether it is mathematically correct. Point out the flaws, if any.
Answer
a Kevin's answer has two flaws. First, it does not cover the case when one of the lines is vertical, and therefore has no slope. Secondly, it refers to the slope of a line, which is not essential for the formal definition.
b Emily's answer is not precise and includes the case of non-coplanar lines, which is incorrect. This can be fixed by adding that the lines are coplanar.
c Heichi's answer is correct and the most classical definition.
Hint
a What is the slope of a vertical line? Is the slope strictly needed when talking about parallel lines?
b Think about two non-coplanar lines that do not intersect. Are they necessarily parallel?
c Remember the two conditions for two lines to be parallel.
Solution
a Once again, Kevin gave a definition in terms of the slope of a line. This is a flaw since it only applies to lines having a slope. This definition does not tell whether or not a pair of vertical lines are parallel or whether or not a vertical line is parallel to a non-vertical line.
Vertical lines have no slope.
Consequently, Kevin's definition fails to cover all possible cases. However, this flaw can be corrected by adding the following premise.
All vertical lines are parallel and no vertical line is parallel to a non-vertical line.
The second flaw in Kevin's definition is that it refers to auxiliary information — the slope of a line. Whereas it is true that two non-vertical lines are parallel when they have the same slope, it is possible to define parallel lines without referencing the slope.
b Emily's answer seems correct, however, she did not say whether the lines are coplanar or not. Without this condition, two lines might not intersect each other nor be parallel. Such is the case for skew lines.
Consequently, Emily's definition is not precise and therefore includes incorrect cases. Her statement can be fixed by adding that the lines are coplanar.
c Notice that Heichi's answer is the same as Emily's answer, but he included that the lines are coplanar. Therefore, Heichi's definition is correct and would be considered the most classical definition.
Explore
What Makes Two Lines Perpendicular?
Whenever two coplanar lines intersect at a single point, they form four angles. By moving points A and B, investigate the measure of the four angles that make the lines ℓ and AB perpendicular. Is there only one line perpendicular to ℓ?
Despite the previous diagram shows four angle measures, knowing only one angle measure is enough to define perpendicular lines.
Discussion
Perpendicular Lines
Two coplanar lines — lines that are on the same plane — that intersect at a right angle are said to be perpendicular lines. The symbol ⊥
is used to algebraically denote that two lines are perpendicular. In the diagram, lines m and ℓ are perpendicular.
Discussion
Perpendicular Lines Using Transformations
Notice that even knowing only one angle measure, it is possible to know if two lines are perpendicular. Consider a pair of perpendicular lines ℓ and m. Is there a way to map line ℓ onto line m by applying a rotation about the movable point C? Try it out!
From the exploration, it can be seen that a rotation of 90∘ around the intersection point sends ℓ onto m. This allows defining perpendicular lines in terms of transformations.
Two lines are perpendicular when one of the lines is the image of the other under a rotation of 90∘ around the intersection point.
Example
Students Define Perpendicular Lines
Three students were asked to write down what it means for two distinct lines to be perpendicular. Analyze each of their answers and indicate whether they are mathematically correct. Point out the flaws, if any.
a Kevin wrote,
two distinct lines are perpendicular when the product of their slopes is -1.
b Heichi answered,
two distinct lines are perpendicular when they form four angles of equal measure.
c Emily wrote,
two distinct lines are perpendicular when they intersect at a 90∘ angle.
Answer
a Kevin's answer has two flaws. First, it does not cover the case when one of the lines is vertical, and therefore has no slope. Secondly, it refers to the slope of a line, which is not essential for the formal definition.
b Heichi's answer is correct. However, it requires finding four angle measures when knowing only one is enough.
c Emily's answer is correct and the most classical definition.
Hint
a What is the slope of a vertical line? When talking about perpendicular lines, is it essential to mention the slope?
b The four angles formed by two intersecting lines make a complete turn of 360∘. Are the four angle measures strictly needed?
c A 90∘ angle is the same as a right angle.
Solution
a Kevin's answer has two flaws. First, it only applies to lines that have a slope. Since vertical lines have no slope, Kevin's answer does not tell whether a vertical line can be perpendicular to another line. Then, his definition fails to cover all possible cases. Adding the following premise would correct this flaw.
Vertical lines are perpendicular to horizontal lines.
Secondly, Kevin's answer refers to auxiliary information — the slope of a line. While it is true that two non-vertical lines are perpendicular when the product of their slopes is -1, it is possible to define perpendicular lines without referencing the slope.
b Consider two lines that intersect and form four angles of equal measure.
Since a complete turn is 360∘, each angle must have a measure of 4360=90∘. That is, the lines form four right angles, and consequently, Heichi's answer is correct. However, his answer has a minor flaw. It requires finding four angle measures when only one is enough.
c Since a 90∘ angle is the same as a right angle, two lines are indeed perpendicular when they intersect at a 90∘ angle. Therefore, Emily's answer is correct and the most classical definition. Notice that, in contrast to Heichi's answer, she only mentioned one angle measure.
Discussion
Defining a Line Segment
One last geometric object to be considered is the section or part of a line between any two of its points.
Concept
Line Segment
A segment, or line segment, is part of a line bounded by two different points, called endpoints. It is made of all the points on the line between the endpoints. Unlike a line, a segment does not extend infinitely, and then it is drawn without arrowheads.
Example
Students Define Line Segments
In the final of a math Olympics, two students from different schools had to define what a line segment is.
b Mark, from South High School, said
a line segment is the intersection of two different rays that are on the same line but have opposite directions.
{"type":"choice","form":{"alts":["Jefferson High","South High School"],"noSort":false},"formTextBefore":"","formTextAfter":"","answer":0}
Answer
Jefferson High should win the Olympics.
a LaShay's answer is correct and the most classical definition.
b Mark's answer is not precise. It includes cases where the intersection is not a segment. For instance, when the rays are opposite rays or when the rays do not intersect at all.
Hint
a Remember that a segment has a length and in consequence, it must be bounded.
b Consider all possible positions for two rays that lie on the same line but have opposite directions.
Solution
a LaShay's answer is correct and is the classical definition of line segment.
b Mark's answer has a major flaw. It does not specify a particular position for the rays. Therefore, it includes the three following cases.
- When the rays are opposite rays. Here, their intersection is only the endpoint.
- When the rays do not intersect at all.
- When the rays intersect at more than one point. Here, the intersection is a line segment.
Since the first and second cases do not represent a line segment, Mark's definition is not correct. It seems like Mark did not consider the first two cases. In consequence, Jefferson High should win the Olympics.
Closure
Real-World Modeling with Geometry
Consider a pair of parallel lines ℓ1 and ℓ2 and a line m which is perpendicular to both lines. No matter where the line m is placed, the distance between the two points of intersection is always the same as the distance between the lines.
The previous fact can be used in different real-world scenarios. For example, think about a train. The distance between the wheels in each axle is always the same. Therefore, the rails must always be a specific distance from each other; otherwise, at some point, the train could crash.
Consequently, to avoid crashing, the rails must be parallel to each other. Thus, the railroad tracks can be viewed as a pair of parallel lines. Here, the train's axles and the sleepers are perpendicular to each rail. 
Be aware that the real world is not as perfect as the scenarios considered in mathematics. For instance, in the real world, lines do not extend infinitely, and planes have thickness. However, these perfect examples are studied because they allow for the ability to draw logical conclusions and estimate real-world cases very well.
Definitions of Geometric Objects
Exercises
Consider the following outdoor tennis court.
{"type":"multichoice","form":{"alts":["<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><span class=\"base\"><span class=\"strut\" style=\"height:0.68333em;vertical-align:0em;\"><\/span><span class=\"mord mathdefault\">A<\/span><\/span><\/span><\/span>","<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><span class=\"base\"><span class=\"strut\" style=\"height:0.68333em;vertical-align:0em;\"><\/span><span class=\"mord mathdefault\" style=\"margin-right:0.05017em;\">B<\/span><\/span><\/span><\/span>","<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><span class=\"base\"><span class=\"strut\" style=\"height:0.68333em;vertical-align:0em;\"><\/span><span class=\"mord mathdefault\" style=\"margin-right:0.07153em;\">C<\/span><\/span><\/span><\/span>","<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><span class=\"base\"><span class=\"strut\" style=\"height:0.68333em;vertical-align:0em;\"><\/span><span class=\"mord mathdefault\" style=\"margin-right:0.02778em;\">D<\/span><\/span><\/span><\/span>","<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><span class=\"base\"><span class=\"strut\" style=\"height:0.68333em;vertical-align:0em;\"><\/span><span class=\"mord mathdefault\" style=\"margin-right:0.05764em;\">E<\/span><\/span><\/span><\/span>","<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><span class=\"base\"><span class=\"strut\" style=\"height:0.68333em;vertical-align:0em;\"><\/span><span class=\"mord mathdefault\" style=\"margin-right:0.13889em;\">F<\/span><\/span><\/span><\/span>","<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><span class=\"base\"><span class=\"strut\" style=\"height:0.68333em;vertical-align:0em;\"><\/span><span class=\"mord mathdefault\">G<\/span><\/span><\/span><\/span>"],"noSort":true},"formTextBefore":"","formTextAfter":"","answer":[2,3,4]}
{"type":"text","form":{"type":"math","options":{"comparison":"1","nofractofloat":false,"keypad":{"simple":false,"useShortLog":false,"variables":["A","B","C"],"constants":["D","E"]},"rendered":false},"text":"<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><\/span><\/span>"},"formTextBefore":null,"formTextAfter":null,"answer":{"text":["ABC","BCD","BCE"]}}
{"type":"multichoice","form":{"alts":["<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><span class=\"base\"><span class=\"strut\" style=\"height:0.68333em;vertical-align:0em;\"><\/span><span class=\"mord mathdefault\">A<\/span><\/span><\/span><\/span>","<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><span class=\"base\"><span class=\"strut\" style=\"height:0.68333em;vertical-align:0em;\"><\/span><span class=\"mord mathdefault\" style=\"margin-right:0.05017em;\">B<\/span><\/span><\/span><\/span>","<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><span class=\"base\"><span class=\"strut\" style=\"height:0.68333em;vertical-align:0em;\"><\/span><span class=\"mord mathdefault\" style=\"margin-right:0.07153em;\">C<\/span><\/span><\/span><\/span>","<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><span class=\"base\"><span class=\"strut\" style=\"height:0.68333em;vertical-align:0em;\"><\/span><span class=\"mord mathdefault\" style=\"margin-right:0.02778em;\">D<\/span><\/span><\/span><\/span>","<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><span class=\"base\"><span class=\"strut\" style=\"height:0.68333em;vertical-align:0em;\"><\/span><span class=\"mord mathdefault\" style=\"margin-right:0.05764em;\">E<\/span><\/span><\/span><\/span>","<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><span class=\"base\"><span class=\"strut\" style=\"height:0.68333em;vertical-align:0em;\"><\/span><span class=\"mord mathdefault\" style=\"margin-right:0.13889em;\">F<\/span><\/span><\/span><\/span>","<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><span class=\"base\"><span class=\"strut\" style=\"height:0.68333em;vertical-align:0em;\"><\/span><span class=\"mord mathdefault\">G<\/span><\/span><\/span><\/span>"],"noSort":true},"formTextBefore":"","formTextAfter":"","answer":[4]}
security
report
code
security
report
code
We want to find three points that are collinear. Points are collinear if they lie on the same line. In the diagram, the line CE will also contain the point D.
Therefore, the points C, D and E are collinear.
Point C lies on the edge between the back wall and the side wall of the tennis court while B lies on the edge between the back wall and the tennis court. Therefore, the plane we are looking for is the back wall. To name this plane we have to use points that fulfill the following criteria:
- They cannot be collinear.
- They are contained within the plane.
The back wall contains points A, B, C, D and E. Since C, D and E are collinear we cannot use these three points to name the plane. Also, we have to include B and C when naming the plane. That gives us three alternative ways to name the plane. ABC, BCD, and BCE
Any point that is on the edge between two planes is contained within both of these planes. If the point lies in a corner where three planes meet, the point is in all of these three planes. Of all of the points, E is the only one that is on a corner.
Therefore, E is the only point that is contained within more than two planes.
security
report
code
Consider the following lines.
{"type":"choice","form":{"alts":["Yes","No"],"noSort":true},"formTextBefore":"","formTextAfter":"","answer":1}
{"type":"choice","form":{"alts":["Yes","No"],"noSort":true},"formTextBefore":"","formTextAfter":"","answer":0}
security
report
code
security
report
code
Examining the lines, they look like they are parallel. However, in geometry, it is not enough that they look parallel. If the lines are parallel, we need something to mark them as such. Usually, parallel lines are identified by hatch marks — these can also be called hash marks or tick marks.
Since we do not have this information of the lines Izabella is referring to, we cannot say that they are parallel. Therefore, we can not verify Izabella's statement.
Just as we need to show if two lines are parallel, we also need to show if two lines are perpendicular. If they are, they should meet at a right angle. In the given diagram, we see a square between the lines.
The square indicates a right angle between the two lines. That indicates the lines are, indeed, perpendicular.
security
report
code
How many angles with measures between 0∘ and 180∘ can be identified in the diagram?
{"type":"text","form":{"type":"math","options":{"comparison":"1","nofractofloat":false,"keypad":{"simple":true,"useShortLog":false,"variables":["x"],"constants":["PI"]},"rendered":false},"text":"<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><\/span><\/span>"},"formTextBefore":null,"formTextAfter":"angles","answer":{"text":["6"]}}
security
report
code
security
report
code
Let's start by counting the smallest angles we can find. There are three of them, ∠ APB, ∠ BPC, and ∠ CPD.
If we combine adjacent angles, we get two more possible angles, ∠ BPD and ∠ APC.
Finally, we can also combine all angles which gives us one final angle, ∠ APD.
In total, we can identify 3+2+1=6 angles.
security
report
code
Consider the polygon ABCDE.
{"type":"text","form":{"type":"math","options":{"comparison":"1","nofractofloat":false,"keypad":{"simple":false,"useShortLog":false,"variables":["A","B","C"],"constants":["D","E"]},"rendered":false},"text":"<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><\/span><\/span>"},"formTextBefore":"<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><span class=\"base\"><span class=\"strut\" style=\"height:0.69224em;vertical-align:0em;\"><\/span><span class=\"mord\">\u2220<\/span><\/span><\/span><\/span>","formTextAfter":null,"answer":{"text":["E"]}}
{"type":"text","form":{"type":"math","options":{"comparison":"1","nofractofloat":false,"keypad":{"simple":false,"useShortLog":false,"variables":["A","B","C"],"constants":["D","E"]},"rendered":false},"text":"<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><\/span><\/span>"},"formTextBefore":"<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><span class=\"base\"><span class=\"strut\" style=\"height:0.69224em;vertical-align:0em;\"><\/span><span class=\"mord\">\u2220<\/span><\/span><\/span><\/span>","formTextAfter":null,"answer":{"text":["AED","DEA"]}}
{"type":"text","form":{"type":"math","options":{"comparison":"1","nofractofloat":false,"keypad":{"simple":true,"useShortLog":false,"variables":["A","B","C"],"constants":["D","E"]},"rendered":false},"text":"<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><\/span><\/span>"},"formTextBefore":null,"formTextAfter":"<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><span class=\"base\"><span class=\"strut\" style=\"height:0.674115em;vertical-align:0em;\"><\/span><span class=\"mord\"><span><\/span><span class=\"msupsub\"><span class=\"vlist-t\"><span class=\"vlist-r\"><span class=\"vlist\" style=\"height:0.674115em;\"><span style=\"top:-3.063em;margin-right:0.05em;\"><span class=\"pstrut\" style=\"height:2.7em;\"><\/span><span class=\"sizing reset-size6 size3 mtight\"><span class=\"mbin mtight\">\u2218<\/span><\/span><\/span><\/span><\/span><\/span><\/span><\/span><\/span><\/span><\/span>","answer":{"text":["104"]}}
{"type":"text","form":{"type":"math","options":{"comparison":"1","nofractofloat":false,"keypad":{"simple":true,"useShortLog":false,"variables":["A","B","C"],"constants":["D","E"]},"rendered":false},"text":"<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><\/span><\/span>"},"formTextBefore":null,"formTextAfter":"<span class=\"katex\"><span class=\"katex-html\" aria-hidden=\"true\"><span class=\"base\"><span class=\"strut\" style=\"height:0.674115em;vertical-align:0em;\"><\/span><span class=\"mord\"><span><\/span><span class=\"msupsub\"><span class=\"vlist-t\"><span class=\"vlist-r\"><span class=\"vlist\" style=\"height:0.674115em;\"><span style=\"top:-3.063em;margin-right:0.05em;\"><span class=\"pstrut\" style=\"height:2.7em;\"><\/span><span class=\"sizing reset-size6 size3 mtight\"><span class=\"mbin mtight\">\u2218<\/span><\/span><\/span><\/span><\/span><\/span><\/span><\/span><\/span><\/span><\/span>","answer":{"text":["79"]}}
security
report
code
security
report
code
Examining the diagram, we see that the angle with a measure of 140^(∘) is located at the vertex that has been labeled E. This means, we can name this angle as ∠ E.
We can also name the angle by considering the sides that form the angle. We see that A E and E D are the sides which create ∠ E. By placing the names of the adjacent vertices on either side of E, we can name the angle.
This gives us two alternatives for naming the angle. ∠ AED and ∠ DEA
Let's first identify ∠ B in the diagram. This is the vertex that has been labeled as B.
As we can see, ∠ B has a measure of 104^(∘).
Like in Part C, we will start by identifying the angle we want to find the measure of. This is the vertex where C D and D E intersect.
As we can see, ∠ CDE has a measure of 79^(∘).
security
report
code
Consider the diagram.
Classify the angle as acute, right, obtuse, or straight.
∠AOC
{"type":"choice","form":{"alts":["Acute","Right","Obtuse","Straight"],"noSort":true},"formTextBefore":"","formTextAfter":"","answer":0}
∠BOD
{"type":"choice","form":{"alts":["Acute","Right","Obtuse","Straight"],"noSort":true},"formTextBefore":"","formTextAfter":"","answer":0}
∠COE
{"type":"choice","form":{"alts":["Acute","Right","Obtuse","Straight"],"noSort":true},"formTextBefore":"","formTextAfter":"","answer":2}
security
report
code
security
report
code
Let's first identify the angle we want to classify. The symbol ∠ AOC refers to the angle formed by the rays that start at O and pass through the points A and C, respectively.
From the diagram, we see that the ray through A passes through the 0^(∘)-mark on the protractor. Also, the ray through C passes through the 30^(∘)-mark. Therefore, the measure of ∠ AOC is the difference between 30^(∘) and 0^(∘). m ∠ AOC= 30^(∘)-0^(∘)=30^(∘) Now, we can classify the angle using its measure.
| Type | Measure |
|---|---|
| Acute | 0^(∘) |
| Right | m=90^(∘) |
| Obtuse | 90^(∘) |
| Straight | m=180^(∘) |
Because our angle is 30^(∘), we know that it is acute.
Like in Part A, we start by identifying the angle we are looking for.
We can see that one ray passes through the 0^(∘)-mark and the other through the 65^(∘)-mark. The measure of ∠ BOD is the difference between 65^(∘) and 0^(∘). m ∠ BOD= 65^(∘)-0^(∘)=65^(∘) Because our angle is 65^(∘), we know that it is acute.
Again, let's identify the given angle.
This time, one ray passes through the 30^(∘)-mark and another passes through the 140^(∘)-mark. The measure of ∠ COE is the difference between 140^(∘) and 30^(∘). m ∠ COE= 140^(∘)-30^(∘)=110^(∘) The angle is 110^(∘), which means it is obtuse.
security
report
code
Definitions of Geometric Objects
Recommended exercises
To get personalized recommended exercises, please login first.
Loading content
Loading content